Gashapon Handle Refrigerator Sticker - 扭蛋机旋钮冰箱贴

This is a mini Gashapon machine handle toy, which can simulate the clear feel and crisp sound when rotating the Gashapon machine handle. Installing 9 4×2 size magnets at the bottom can be used as refrigerator stickers to turn the refrigerator into an "Gashapon machine".

In addition to magnets, other parts can be printed without support. It is recommended to use filament printing ratchet with good elasticity and toughness. The arrow indicating the direction of rotation can be colored with a marker, or AMS or pause color change for two-color printing (when using 0.2 layers of high printing, replace the top two layers with the second color) .

If you are worried that the ratchet will fall off from the printing panel, you can print the version with brim. If you want to install magnets of other sizes, you can download the no hole version of the base model and edit it yourself.

Installation method: Plug the two blades of the ratchet into the base, point the shaft hole at the rotating shaft, then plug the other two blades in and press them into place, and finally install the handle.

这是一个迷你的扭蛋机旋钮玩具，可以模拟旋转扭蛋机旋钮时清晰的手感和清脆的声音，在底部安装9颗4×2磁铁可以当做冰箱贴，将冰箱变成“扭蛋机”。

除了磁铁，其他零件均可打印，无需支撑，棘轮建议使用弹性韧性较好的耗材打印，旋转方向指示箭头可以使用马克笔涂色，也可以使用AMS或暂停换色进行双色打印（使用0.2层高打印时将最上面两层更换为第二种颜色）。

如果担心打印棘轮时会从打印面板上脱落，可以打印带有裙边的版本。如果你想安装其他尺寸的磁铁，可以下载无孔版本的底座模型自己编辑。

安装方法：让将棘轮的两个叶片塞进底座，将轴孔对准转轴，再将另外两个叶片塞进去按压到位，最后装上旋钮即可。