NFC Case with 12mm magnet - Tonie Coins

I remixed the model from clavo to fit a 12mmx3mm magnet in it. Additionally you will find a variety of print profiles. So you can print from your phone the desired amount of coins.

Recommendations from clavo with my adjustments:

• Use PETG. PLA could be too brittle.
• I used ACTIVEME PETG+ Clear for the lid (amazon link).
• Model is designed for 0.2 mm layer height (first four layers of the lid will be printed with 0.1mm layer height)
• Magnets 12x3mm