Ladder Tray V2

***Update 2/19/25***

New Version 3 released 

https://makerworld.com/en/models/1127811#profileId-1127518

***Update 8/15/24***

Got some feedback about fitment issues of the tray not fitting well and/or breaking when put onto the ladder. So made some test templates that can be quickly printed so you can get one that perfectly fits your ladder as I have found out they are not all made the same. The measurement is center to center of the groove holes it would probably be best to start at 163mm and go from there, just be sure to print the test pieces at 0% infill to make the print quick as possible(took around 30 min using 15 grams on my A1). 

Any feedback is greatly appreciated! 

Tool tray for Werner ladders, this has been something I've been working for a few months and I'm pleased to share this. The tray slides and fits firmly into the grooves of the ladder and has extra storage for screwdrivers or bits. I have printed all of mine at 40% infill and has been able to handle the abuse I put it through everyday, if you have any questions or need changes please message me.