Spool Shelf Storage

Do you have leaning towers of filament in your workspace? Put it on the wall!

Here's everything you need!

1. Check that your wall studs are 16" apart and mark them
2. Print a full set of brackets (4 pieces) or as many as you like
   1. (1) end cap left, (2) middle supports, (1) end cap right
   2. For Bambu users, we recommend 0.2mm Strength Profile 
3. Grab (8) #8x1.5" screws, preferably button head
4. Pickup (2) 1"x48" dowel rods

Fasten the brackets to the wall ~16" apart and insert dowel rods. We find it easier to use a level and fasten the endcaps first and the supports second. 

~20 second build video: https://www.tiktok.com/@overture_3d/video/7301001493333708075

*Disclaimer: Print and test at your own risk. Fully loaded with ~40lbs of filament, each bracket will sustain 10lbs. Ensure that your studs, fasteners, and print settings are appropriate before loading.

Happy Printing!

- Overture Team