Magnetic fridge memo for notes and post-its

Thanks to this magnetic memo for your fridge, you'll never forget to buy milk anymore !

It's available in 2 different versions:

• One for normal paper notes - suitable for papers of around 11cm high for 10cm wide

For this model, a clip has to be printed to maintain the parper. I recommend using PETG for the clip, to have a better resistance and elasticity. However, it's possible to print it using PLA, I tried and it works fine, but there may be more adhesion at the teeth of the clip. I didn't have this issue with PETG.

The clip can be difficult to push in, but this is necessary to be able to press the clip without removing it from the plate

• The second one is for regular post-its (77mm / 3inches on each side)

For this model, you just have to remove the back paper of the post-it bloc, to stick it on the plate

**************

For both models:

• There are 6 holes to add magnets behind the plate. I used 5mm * 1mm round magnets, but you can easily change the size of the holes in Bambu Studio if needed
• The pen slot is 12mm wide. If you want to use a narrower pen, I've added reducer models that you can clip into the pen slot (10mm, 9mm, and 8mm)
• If you want to print in 2 colors to differenciate the wood form the wood veins, you just have to swap filament at layer 16 (when printed with 0.2 mm layers)

**************

Don't hesitate to give me feed back about my creation! If you like it, please tell me. And if you print it, I would really enjoy to see a picture!

Happy printing!