Floppy Disk NFC Tag Holder

I made a parametric model of the floppy disk. The STL file is 60% of the original size and a little bit thicker that the original size to hold the NFC tag better. The bonus of this size is that it is just as wide as a credit card.
When scaling the model in fusion 360 use the multiplier parameter to scale the model. The tag hole size stays the same.

Recommender print settings:

• layer height: 0.12 mm
• Print nozzle: 0.4 mm

The NFC tag i used is this one (Affiliate link): https://s.click.aliexpress.com/e/_Dev4RYb