Saturn 4 & 4 Ultra Lid Lift

This is a lid handle for the Elegoo Saturn 4 and Saturn 4 Ultra. It is connected with double-sided mounting tape (foam or clear rubber types should both work). There is a cutout on the mounting surface to help keep the handle close to the lid which improves the look. Simply mount the double-sided tape in the cut out and press on. I suggest using a thin, flat, and wide piece of cardboard (like a playing card) right under the mounting position to act as a guide (between the lid and the printer base). This will give you a method of placing the handle on straight and flush to the bottom of the lid. This will work as a filament or resin print, but note, Chitubox will only read the 3MF file (not the STEP file). So, if you plan to resin print, download the 3MF file and open it like normal in Chitubox. 

Note, the AMS painted face was left off the official print profile as this adds significant time to the print, however you can use Bambu slicer to paint that section if you please.

UPDATED:

Now includes two lid lifts, tall with a blockier look, and short with a more filleted look. But note, with the taller version, firm double-sided tape holds incredible firm. However, with the short version, the lower surface mounting area does makes it noticeably less firm. 

UPDATED:

Now includes two new lid lifts, a short and tall version with the cutout removed. I personally prefer the cutout which keeps the handle closer to the lid (no big gaps), but some have requested the flat surface for greater surface area. Either way, both the cutout versions and non-cutout versions will continue to be available.