Portal Pals - Fun Fridge Magnets

The Portal Guy is reaching into the fridge for a snack, drink, or just to chill.
Choose your mood or hint to your guests about what's in the fridge (The fridge is a lie?).

Print Profiles:

First Profile (1 Plate):

• 2 Portal gates
• 1 Portal magnet cutting guide
• Portal guy back parts (rear arm, rear leg, front leg tip)
• All front portal guy variations

Second Profile (2 Plates):

• Plate 1: 2 Portal gates (Plate is set to Print By Color - for shorter print time)
• Plate 2: Portal guy back parts, all front portal guy variations, 1 Portal magnet cutting guide

Both profiles are Precolored and ready for AMS, also both include supports for the “frozen” guy variation and the magnet cutting guide.

DIY Magnet Cutting Guide:

Use 0.4mm thick adhesive magnet sheets, available at hardware stores, DIY shops, or online (e.g., Amazon - 0.4mm magnet sheets).

Instructions:

1. Cut a 8cm x 5cm rectangle from the magnet sheet.
2. Fit it inside the magnet cutting guide model.
3. Cut the outer part of the magnet with scissors.
4. Lightly press a utility knife on the magnet and follow the inner guide circle to mark the area to remove.
5. Take the magnet out and cut along the marked area.

6. For the Portal guy magnets, cut strips of 4-5mm thickness for a firm hold.

   
   

Feel free to DM or comment with any questions. Thank you, and enjoy!