Philips Espressor 22xx - milk frother head holder

Due to multiple plug in / plug out, the rubber end of the milk frother device became loose and no longer stays firmly in place, so when the steam function is turned on, the milk frother device is thrown out. 

I designed this fixing system, to prevent that with the help of a toothpick. 
It should work on a various range of Philips EP series like EP22xx , EP32xx, etc. 

____________________________

UPDATE v2 !!!

I decided to adjust the length a little bit so it can be bent more when using the screw.

___________________________

v1 below 

I used a toothpick (cut in half) to secure the milk frother in place, because is cheap and widely available in any kitchen,  but you can use a M2.5 - M3 screw if you like (although, that might prevent you from cleaning the head properly) . 

____________________________

You will also need a 2-2.5 mm drill bit to drill the hole trough the rubber of the milk frother (see the picture below).  

I also uploaded the .f3d file, so feel free to make it better and share it with us 😊!