Ancient(Old style) Chinese Lock No.3 / 中国古锁 No.3

This is my iteration of a previous model of an ancient Chinese lock

Compared to the previous No2. it has an keyhole that is offset on one side of the lock.

This means that a more complicated method is required to open this lock.

Please consult the documentation for instructions on how to open it.

Again, I have made support parts for it to facilitate direct printing.

And this lock has two versions: long and short (in fact the difference is only about 15mm).

For more information on how it works and printing notes, please go to Ancient Chinese Lock Models No1..

这是我对之前的中国古代锁的模型进行的迭代，

相对于之前的No2.，它的锁眼是偏置于锁体一侧的。

这意味着需要更复杂的手法打开这把锁。

关于打开的方法，请查阅文档。

同样的，我也为它做了支撑部件，以方便直接打印。

并且，这款锁提供了长和短两个版本(事实上两者相差仅仅约15mm).

关于工作原理和打印注意事项，请前往中国古代锁模型查看。