Magnetic Watercolor Paint Box

Name: Magnetic Watercolor Paint Box
Version: v0.7

Printer Model: Bambu P1s
Layer Height: 0.2 mm
Nozzle: 0.4 mm
Material: PETG/ABS
Infill Density: From 20%

Printing Notes:
No supports needed
Dimensions: 5.7 x 8.8 x 1.93 cm

Additional Materials:

• Cylindrical Magnets:
  • M4x5: 4 pieces
  • M4x1.5: 8 pieces

Installation and Usage:

1. Pay attention to the direction of the magnets, especially the orientation of the bottom magnets and the lid magnets, as this will determine which side faces the ground when the lid is magnetically attached to the back (this is up to you).
2. If painting, apply white spray paint on the palette side for a smoother surface.
3. There are grooves on the bottom of the palette that can latch onto the edges of the main body on both sides.

Design Concept:

• The size was chosen from two playing card sizes and a bank card size, resulting in a dimension of 5.7 x 8.8 cm. Each compartment is closer to a square shape, balancing capacity and grip.
• The V-shaped groove in the middle can temporarily hold a pen.
• The openings at the top and bottom can accommodate a hook for hanging on a bag.

------------------------------------------------------------------------------------------------------

名称:磁吸水彩颜料盒
版本号:v0.7

打印机型:Bambu P1s
层高:0.2
喷嘴:0.4
材料:petg/abs
填充密度:20%起
打印注意:
不加支撑
尺寸:5.7x8.8x1.93cm

其他材料
圆柱磁铁:
M4x5 4个
M4x1.5 8个

安装与使用:
1.注意磁铁方向,特别底部的磁铁方向和盖子的磁铁方向,决定盖子磁吸在背面时候哪面朝向地面(由你自己决定)
2.有喷漆的话在调色板这面喷上白色喷漆,更光滑.
3.调色板底部有凹槽,可以扣在主题左右两侧边缘.

设计想法:
大小上从两种扑克牌规格和银行卡规格中选择了5.7x8.8cm大小,每个格子也更接近正方形.是保证容量和握持感的平衡.
中间v字凹槽可以临时放笔
上下开口可以加个挂扣挂包上