Rune Doom - Hueforge

Project: doom rune.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.5mm and the Actual Depth is 1.5mm

Filaments Used:
PLA Red Transmission Distance: 4
PLA Black Transmission Distance: 0.6
This print uses 2 unique filaments

Swap Instructions:
Start with Red
At layer #10 (0.88mm) swap to Black for the rest.