AMS 2 PRO Versions are coming soon, this series of SPILLPROOF Desiccant Boxes are for the original AMS only. AMS 2 PRO versions will be titled “SPILLPROOF 2" to avoid confusion.
SPILLPROOF AMS Desiccant Box - ROUND Hygrometer
This series of Models are based on Cagriahiskali’s beautiful desiccant boxes, and the many other remixes for various hygrometers by others credited in the remix-based-on section below.
There are two orientations of Round Hygrometers, please choose the Print Profile that matches yours from the Print Profiles list:
For Maker's Supply and Vertically Mounted Hygrometers- use ‘Maker’s Supply Hygrometer' Print Profile
These are all re-designed completely, but keeping the face design.
Redesigned slide rail lids, closure, handles, and orientation.
These slide-on covers positively enclose the desiccant with a nice SNAP that is easy to re-open without damaging the closure.
Specifically redesigned to not explode-open inside AMS
Lid cannot slide off inside AMS, lifting the box by it’s tab closes it even tighter
Works with Silica Gel beads and Activated Alumina beads
Middle larger boxes can be DOUBLED-UP to get even more desiccant in, just print an additional 2 and slide in behind the first set. (I don't recommend doubling up the center position to allow air to reach the hygrometer. Skinny side boxes cannot be doubled up due to space limitation) Use the Double-Up print profile to print just these.
As featured in BV3D: Bryan Vine's video about Desiccant in the AMS:
Versions for each popular hygrometer variety are available:
Joey Lopez Design (AeonJoey)
