Plant and Cacti Fridge Magnet Set

Description
I wanted to create some small plants for our fridge and magnetic planner. I have created several basic plant types using my beginner modelling skills. I hope that you enjoy. There are 12 different plant inserts to suit your fancy. If you have any requests please comment.

 

Boost MeBoost me to help support more uploads. I print all my files so the boosts go a long way!

Plant Install

The plant inserts can be pressed into the pots. I do not see the need for glue in combining the plant and pots except in the case of the monstera leaf plant when attaching the leaves to the stalks. 

Please note that the flower plant (contained in a separate print profile) is not able to be printed in the more thick layer heights. It is set up to be printed using .12 layer height as well as using arachne wall generator. If you print it without these settings the petals will not work.

Magnet Install

I suggest using a small amount of glue to hold the magnet in place long term. You can adjust the size of the openings in the Bambu Studio according to the magnet model that you own. I have provided for 6x2mm as well as 5x3mm magnets and these should just press in to place.
 

I recommend leaving .1 or .2 extra space based on the magnets that you are using.

Thanks!