Hueforge Inception

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 225x126.54mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Beige
At layer #24 (2mm) swap to Jade White for the rest.

My first Hueforge and more to come in the future

Light colors will work well with shading and should be interchangable if light enough

This hueforge is thick and not paper thin. I perfer hueforges to be thicker and more durable

Show off your other colors with this