Death Stranding Cliff Unger Mini-Poster Hueforge

Small and quick Hueforge printed at 0.16 layer height with a 0.16 layer height first layer, only 2 filament change. prints under 45 minutes.

Instructions to print:

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

The Model is 103.94x220mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 3mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6 (or any black of similar Transmission)
    PLA+ Elegoo White Transmission Distance: 8 (or any white of similar Transmission)
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.96mm) swap to White for the rest.

    If you're not sure about how to print hueforge, follow the guide here: https://wiki.bambulab.com/en/filament-acc/filament/hueforge-printing-guide