Deadpool vs Wolverine - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 99.03x150mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 4 unique filaments

 

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Jade White
At layer #14 (1.2mm) swap to Yellow for the rest.
 

Update : A photo Frame has been added if you need it separately 

Boost MeHelp me to improve myself making better things for you :)

How about buy me a coffee

buymeacoffee.com/spank7