August 9, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can change the X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 4.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Pink Transmission Distance: 8
This print uses 5 unique filaments. Substitute as needed.
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Jade White
At layer #13 (1.12mm) swap to Blue Gray
At layer #19 (1.6mm) swap to Jade White
At layer #28 (2.32mm) swap to Lilac Purple
At layer #43 (3.52mm) swap to Pink
At layer #50 (4.08mm) swap to Jade White for the rest.
License:
Standard Digital File License
Corp
