August 9, 2024
Description
Project: girl calavera carnero.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 135.47x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil marron Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #7 (0.64mm) swap to marron
At layer #9 (0.8mm) swap to Gray
At layer #14 (1.2mm) swap to White for the rest.
License:
Standard Digital File License
Kheev_Fpv
