Slice Art Model

This is a human body model with an artistic structure of slices. It is interesting and can be played with. The design has the following features

1. Printing is done by slices, and no support is required.
2. It can be freely scaled for printing. The current print setting model height is 25cm. It is not recommended to enlarge it, but it can be reduced for printing
3. You can use any consumables for printing, and you can press the plate for multi-color printing, and the number of colors can be freely controlled.
4. Assembly is simple and reliable.
5. Each slice has a reserved activity space. After assembly, you can slide each slice to change the shape of the model

Assembly instructions:

1. First, insert the long support stick model into the first slice model so that they are completely embedded to complete the support structure of the entire model.
2. Each slice is marked with a sequence number. Insert all slices into the long support model in ascending order, and then insert the last slice model into the top of the support to complete the assembly.
3. Make sure the correct slice order during installation, and most importantly, make sure that the numbers on the slices are in the same direction.

Boost Me

这是一个切片艺术化结构的人体模型，造型有趣而且可以上手把玩，该设计有以下特点

1. 采用分片进行打印，不需要任何支撑即可打印。
2. 可以自由缩放进行打印，现在的打印设置的模型高度为25cm，不建议再放大，但可以缩小进行打印
3. 可以使用任何耗材进行打印，可以按盘来进行多色打印，颜色数量自由控制。
4. 组装简单可靠。
5. 每块切片预留活动空间，组装完后可以进行滑动每一块切片来改变模型外形

组装说明：

1. 首先将长条的支撑棍子模型穿进第一块切片模型，使它们完全嵌合，完成整个模型的支撑结构。
2. 每一块切片都标注了顺序数字，将所有切片按照递增顺序穿入长条的支撑模型，然后将最后一片切片模型卡进去支撑顶端即可完成组装。
3. 安装时请确保正确的切片顺序，最重要的是一定保证切片上的数字方向一致。