August 10, 2024
Description
Project: Goku logo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 193.01x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA Francofil Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #11 (0.96mm) swap to Orange
At layer #19 (1.6mm) swap to White for the rest.
License:
BY-NC
Dakiren
