August 11, 2024
Description
This is a simple edf V2 i based on a cheap amazon dc motor (14.8mm*19.8mm).(in parts below)
1. Clip the motor (with wires) in the slot with the shaft facing the smaller hole and stick the wires from inside throught the small hole to the outside.
2.Push the propeller through the bigger hole past the motor.
3.Push the propeller on the shaft.
4.Get the X shaped part and press it in the big hole (there are 4 small slots).
5.Put the donut shaped thing on the end where you pressed the x in.
6.be happy .
Motor:
License:
Standard Digital File License
Makers_Maker
