I simply adapted the work of 'BlkWgn' to the TS101:
- I imported the bottom insert from here and modified it to have a longer cable organizer.
- I then created 2 different versions of the lid, one with just the Miniware logo, and the other with the logo and 'TS101' writing.
You will need:
- M3x20 screws (6 pieces)
- 608 bearing (1 piece)
Tips:
- print the stand in PETG
- print the latches in TPU, they work better
- I left the pins made by 'BlkWgn' in the project, however I think that the M3 screws are much better
In the print profile you can choose between 2 different top lids and 2 different top inserts.
UPDATE:
- Fixed the original 'Pinecil Bottom Cable TS101' because the edge between the wall and the bottom was too thin.
- Fixed print profile with "Thin Wall Detection" enabled.
See my other models for FPV and whoop.
Spugno
