"Doors of Durin" Plaque - Behren Designs

“Speak friend and enter” a world of high detail printing with this plaque based on the art of J.R.R. Tolkien. This artwork will showcase your 0.02 nozzle's ability to render fine lines. Example printed in Kingroon PLA Plus.

Made of ithildin by Narvi and Celebrimbor, the Doors guarded the western entrance of Moria for thousands of years.

A great gift for the Tolkien enthusiast!

It's strongly recommended to take the following steps for optimal results printing this model:

• Wash your build plate with a mild, oil repelling detergent (such as Dawn), and rinse and dry thoroughly.
• Calibrate the filaments being used, especially if this is the first time using a filament with a 0.2 nozzle.
• Reduce the bed temperature from 65 degrees C to somewhere in the range of 40 C - 55 C after the first layer is complete. Alternatively, you could use a cool “Cryo Grip” type plate, but this has not been tested with this lithophane. 
• Your local conditions and materials will vary, so you may have to experiment.