Hueforge Venom

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x173.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Sunlu Purple Transmission Distance: 6
    PLA Sunlu blue Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Purple
    At layer #9 (0.8mm) swap to blue
    At layer #10 (0.88mm) swap to White for the rest.