T3-M4 Astromech Droid Articulating- KOTOR

Here it is! the Long awaited T3-M4 Astromech Droid! One of the companions in the classic Start Wars video game: Knights of the old republic!

This is a non-electronic version of the T3-M4 Droid, but every joint articulates! You can place him in any number of ways! 
It is currently scaled to 38 % of the actual size to fit on the build plates of a Bambulab. You CAN scale down to 20% for a great little desktop size (as pictured), or download the STL files and print full size- I won't be cutting them up for printing in actual size until I add mechanics for servos- so unless you have a large printer, So stay tuned for that one!

IMPORTANT NOTE!!!:
- This model is made with EXACT tolerances. You MAY (WILL) have to do some sanding to make the wheels spin, or joints to smoothly articulate. However it goes together really quickly and nicely. Don't sand too much on the joints, or they won't hold in place with friction. 
- Also note- You can rearrange the print and change your own settings of course, But he prints fine with the ones built in this file. 

Assembly Instructions! 

Here's the altogether assembly GIF. Scroll down for individual instructions!
 

1) Assemble the Feet and front arms
- push the wheels into the hubs
- place the pins into the wheels to secure them
- center the front arm end in between each set of front wheels
- push the arm into the end, and secure all 4 pieces with the longer pin. 
- connect the shoulder to the top end of the arm
- push in the joint to the shoulder
- Repeat for both arms

2) Back Wheel Assembly
- Push the wheels into the hub
- Connect them with the two pins from the inside
- Push the axle spacer shoulder connector all the way through
- Connect the body pin to that
- Repeat for both sides

3) Torso and Probe Assembly
- Snap one side, into the other
- secure the top of the rear cannister into the bottom
- connect the two sides of the rear cannister box together around the rear box
- Push the box into the back of the middle section

4) Neck Assembly
- Push the Bal Pin into the bottom of the slotted neck piece (WILL BE TIGHT)
- push the two neck pins into the slot piece
- Connect the swivel onto those pins. 
- Slide the Head Baseplate onto the neck swivel securely
- Push the whole neck into the center base hole.

5) Head Gadget Assembly (3 Groups)
Antenna:
- Connect the Antenna to the antenna stem, to the antenna base (may require glue)
Top Pop up Gun :
- Connect the gun front to the gun rear
- Push in the two little pins that will also snap into the top plate (may require glue)
- Align the rear ot the gun with the back hole of the arm bar
- push the long pin through the front of the arm bar
- push the shorter one through the back of the gun into the arm bar
MAIN Eye:
- Connect a securing bolt to one end of the eye pin
- push that through the back of the eye
- connect the other bolt on the other side
- Snap on the front of the eye


6) Head Assembly
- Slide the Antenna into the top head section
- Push the whole pop up gun section into the pin barrel in the middle section
- Slide the eye bolts into the two squares on either side of the eye
- Push the whole top onto it to secure everything in place
- Slide the two smaller eyes into place

7) Connecting arms and wheels
- Secure both front arms into either side of the center in their respective holes
- Secure both rear Wheels into their rear holes

And there we have it! 
Fully Articulating T3-M4 KOTOR Astromech Droid!