Superman Hueforge

Project: Superman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 128.58x225.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #20 (1.68mm) swap to Blue
At layer #23 (1.92mm) swap to Jade White
At layer #24 (2mm) swap to Mandarin Orange
At layer #25 (2.08mm) swap to Jade White for the rest.

Another Hueforge, really like this one as superman looks really good here.

dialing in my hueforge thickness to try and use less black then actually needed while still being thick enough not to be like paper.

I will keep uploading and I will keep learning all about hueforge to make things better.