Watch Display Box

I designed two Watch display Boxes with two different sizes. (Large, Small)

The Inlay design is inspired by GodfatherAngelo's Toyo Tools Watch Box. (Go check his one out)

In the Small one most classic Watches do fit. The Large one is for the big Watches.

For the lid you will need a piece of Glass or Plexiglass with the diameters of 15cm x 20cm x 1mm. I bought mine from Amazon.

Print the Lid and then place the Glass on it. After that glue the Glass frame on top of it.

I used PLA as main Material and also 3 Layers of PETG on the edge of the support to have a clean Layer after the support layer.

I made mine for a friend an personalized it on the front with his Initials and his Brand.

If you like my designs Buy me a Coffee :)