SpaceX Raptor 3 Stand with Optional LEDs

This model is for personal use only, please do not print and sell.

This is a stand for for my Raptor 3 rocket engine. The stand is designed to have Ws2812B LED light strips installed and controlled by a D1 Mini running WLED. However it works as a stand without LEDs too :D 

Parts list if you want to add LEDs

• Wemos D1 mini ESP board (I use the “v4 USB-C” versions found on amazon) →  https://www.amazon.com/gp/product/B0CL9CTXZH/

   

• WS2812B LED strips 
  • I use 5v, WS2812B, 60 LEDs/M strips  → https://www.amazon.com/dp/B088BPGMXB
  • 1 strip cut to 5 to light up the lettering

  • 1 strip cut to 10 LEDs to bend and install in the circular part that the engine sits on
    See wiring diagram image attached

     

• 26awg silicone wire as needed

   

• Optional switch to cycle presets and turn on/off the LEDs   → https://www.amazon.com/dp/B07FS55G9P

  
  
  Install WLED software on the D1 Mini, there's no code needed!
  https://kno.wled.ge/

   

  WLED Presets and config files:

  https://warpspeed3dprinting.com/pages/raptor-3-led-stand