Smooth Flowing Bambu X1C Purge Chute Bin

I explored many of the other designs out there and generally wasn't satisfied with what I found for my application. I wanted something that brought the filament purge waste closer to the front of the printer, while minimizing the side footprint requirement.

The main issues I encountered with others were:

• The print required supports
• Too wide of a footprint
• Did not encourage filament to flow far enough forward
• Interior geometry followed the contour of the exterior, leading to buildups
• The front edge is too tall making it difficult to remove poops

I resolved these concerns with this design. This purge chute bin features:

• Flowing interior geometry like a river rafting adventure ride to encourage the filament waste (poops) to slide as far forward as possible
• Front edge is lowered for easier access
• Side footprint is minimized
• Magnetic mounts
• Prints with zero supports

Materials:

• 10x3mm Magnets
• DURAMIC 3D PLA Plus Silver
• Non-Marring Soft Jaw Pliers

Installation:

The magnets are interference press fit. I like to use non-marring soft jaw pliers to press the magnets in, you can also use standard groovelock V-jaw pliers with a thick cloth or plastic blocks in between. Due to printing variances, you may want to use glue to hold the magnets in place.

Note: Amazon links are affiliates.