AMS Smoot PTFE transition v2.1, 2.5degree.

Thanks to Poli27 https://makerworld.com/en/u/3153415205

I redesigned this version for the people who deeply modify their AMS and install the Hydra modification.

Hydra tilted the (4) pickup heads backward to gain space, causing my mod to hit the cover. Poli27 did bring that up to my attention and is trying to assist me on how much to tilt back.

Based on the pictures Poli27 submitted, I figure 2.5 degrees should do the trick. If it's not sufficient, let me know… And I will head back to the drawing board… Well, PC chair…

I'll save you from the rest. It's the same stuff. I'm an ABS guy, and so on. I used the same profile to test the print, but I did print in Yellow as it's not the original.

One thing. This probably works on all AMS, mod or not.

I have to add. this doesn't need a tits, Daniel… It's fine as it is. A 1.5mm tits would not improve anything. Ir d.putin the JA.

Talk to you later on.