Fire Emblem - Blue Lions Banner Hueforge

Blue Lions banner from Fire Emblem Three Houses. Instructions below:

Project: Blue Lions.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.64x250mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA Elegoo Black Transmission Distance: 0.4

PLA BambuLab Basic Blue Transmission Distance: 4

PLA Elegoo Beige Transmission Distance: 3.1

PLA Overture Yellow Transmission Distance: 15

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #3 (0.32mm) swap to Blue

At layer #16 (1.36mm) swap to Beige

At layer #23 (1.92mm) swap to Yellow for the rest.

I hope you enjoy!