Dacia Spring Electrical Cable Hook

Cable organizer for Dacia Spring Electrical cable. I looked for a round design and a seamless installation.

It is intended to be installed on the right side; on the left side may just work by mirroring the design but I did not try that yet.

Installation:

• Preinstall two 3mm x 25mm screws without exceeding the cut area (see picture as example)
• Remove a carpet button (the hole on the bottom)
• Place the hook on the 2 holes and press it on the car side to assure adherence
• Screw

I do not have much experience with materials in general and thus no experience with material for car, so suggestions and profiles are welcome. So far I printed it on ABS 3 walls 25% infill gyroid and it seems very stiff.