Universal Low Friction Adjustable Spool Holder

This Universal Low Friction Adjustable Spool Holder is based on my low friction adjustable spool holder design for the A1 mini. An optional Wall-mount section is included.

Please review all pictures for easier assembly. You can also view this video as a reference for assembling the main tube.

Assembly steps:

Step 1: Place the stand on its side and place eight bearings around the shaft at the base.

Step 2: Carefully slide the inner section of the main tube ( the section with the slide channels ) over the bearings.

Step 3: Place the remaining eight bearings around the shaft and on top of the inner tube section.

Step 4: Align the four points of the outer main tube and slide over the bearings and the inner main tube section until it stops.

Step 5: Hold the inner section of the main tube and turn the outer section in a clockwise direction until it clicks over the lock tabs in the inner tube channels.

Please note: Follow the steps above to assemble the optional wall-mount spool holder.

The spool assembly is now complete and can be adjusted by sliding in the channels and locking over the tabs to keep the set position in place. Please post your makes. Enjoy