August 25, 2024
Description
Project: Pyra Mythra.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 132.9x170.87mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA i3D Tested Negro Transmission Distance: 0.6
PLA i3D Tested Gris oscuro Transmission Distance: 0.8
PLA Sakata 3D Gris claro Transmission Distance: 1.4
PLA i3D Tested Blanco Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Negro
At layer #10 (0.88mm) swap to Gris oscuro
At layer #16 (1.36mm) swap to Gris claro
At layer #22 (1.84mm) swap to Blanco for the rest.
License:
Standard Digital File License
Garder3D
