Shower Daddy - Clip-On Basket and Brush Holder

Introducing the Shower Daddy!

All-in-one clip-on shower basket for holding soap, shampoo, toothbrush, toothpaste, and other shower supplies.

Prints in two pieces with dovetail connectors, simply print the main body and the clip of the correct size, then slide the clip into the body using the dovetail.

No supports, raft, or brim needed. Designed for 3D printing.

Just print the basket normally and the clip upside down with the large flat face on the bed.

*I recommend using super-glue/PU glue/3Dgoop inside the dovetail joints and/or welding the clip and body together with a soldering iron to ensure the basket doesn't slide out from the clip when in use. I used CA glue (not the best for durability) AND welded them together with a soldering iron and it seems more than adequate, but can't speak to longevity.

Basket size: 125mm(L)x125mm(W)x100mm(H)

Clip sizes: 38mm, 45mm, 50mm (If these don't work, you can edit the STLs or leave a comment with your needed size and I will try to upload one for you)