The Flash - Hugeforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 131.88x200.01mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #15 (1.28mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.

Boost MeHelp me to improve myself making better things for you :)

How about buy me a coffee

buymeacoffee.com/spank7