State of Oklahoma terrain

Next up, Oklahoma! I chose this state to test that the scale and the settings used was right.

 

It is a tight fit against Texas due to the details on the border. I did notice the bottom layer being slightly larger than the top. Let me know if you have any suggestions on how to fix this.

 

If you like this project and want to see more, give me a follow and your state will be coming up soon!

 

Boost MeOr even better, give me a boost! Just a single click to show your support. Thanks for looking!

 

Print Settings

This was modeled and printed with a 0.4 nozzle and I find the terrain details amazing already. Using a 0.2 nozzle may provide additional details but might not be worth the extra time taken to print. Scaling up works fine but I would make sure you have enough bottom layers if trying to scale down. You can probably scale just the z-axis to get more exaggerated terrain, I have not tested this.

 

This is a big and detailed model, be patient when slicing. Please ensure your bed has proper adhesion, a brim is not recommended as it will be a pain to properly remove due to the tiny curves/angles of the model. Ironing on for the best looking terrain!