Ikea Maximera Drawer Front: Hole Template

Hole Template to make your own Ikea Maximera Drawer Fronts!

This template contains the hole pattern for all Maximera drawer fronts (Low, Medium, and High).

Allows you to build your own Ikea drawer fronts as shown in my pictures. When assembling a Maximera drawer (any size) the drawer front is laid on the ground front-side down, and the sticker label at the bottom. These templates are oriented the exact same way and are labeled as such in the 3D model.

The piece labeled ‘Right Side During Assembly’ will hug the bottom right corner of your drawer front and allow you to drill 5mm holes that are perfectly placed.

Meant to be used with a 5mm drill bit. I like this one (not an affiliate link): Fisch Brad Point Bit but you can use any 5mm drill bit (just don't drill through your drawer face!).

My drawer fronts are solid Ash, finished with Rubio Monocoat Oil+2C White. (tip: 2 coats is way better than a monocoat)

Print for yourself, or use as inspiration to design your own, or just print the ones I've already made.

https://www.buymeacoffee.com/jt_311