Compact Accessories Box for X1C/P1S/P1P

UPDATE. Oct. 25, 2024:

From user request, I designed a lid which is now 4mm higher to better serve for fully assembled hotends. It is available as a separate print profile in standard and high profile.

Thanks for your valued input!

UPDATE, Oct. 6, 2024:

I designed an additional version of the box, which can encompass an attached fan. The outer dimensions and the lid remained unchanged, so that you just need to re-print the box, if needed. 

I added two new profiles with 0.16mm and 0.20mm, which contain the lid and the spacer, too.

Thanks for your valuable feedback and contribution for improvement!

Reason:
From your feedback I found out, that BL ships fully assembled hotends WITH the fan already ATTACHED. 
When I ordered my fully assembled hotend the fan came NOT attached, but was packed separately. Thus, I designed the box without the fan attached, but only with the heater assembly, without knowing better. Sorry for any inconvenience.

UPDATE , Sept. 22, 2024:
I fixed the .3mf print profile so that lid is now sliced correctly again with the logo on the top. Apparently something has been changed in Bambu Studio which resulted in the logo not being printed.

Now everything is corrected now.

Sorry for any inconvenience!

-------------------------------------------------------------------------

I like the design and and how the box is divided for the various items, but for my use it lacked of not fitting into my drawer inset and not taking full hotend assemblies.

So I remodelled it to my needs. Thanks and credits to marcopolo for the original design.

Changes:

• Removed one slot for hotend, adopted dimension of box end lid accordingly
• Modified box and spacer to encompass full Hotend Assemblies
• Added additional slots for wiper and cutter (now three of each)