Bat Scraper

Tired of printing off a scraper?

The Batscraper was simply the idea of having two scrape heads back to back so one print saves you time, lasts longer, saves filament.
 

Then I thought if I made the incline of one head higher it would provide a more robust edge making the tool last longer.

but then if I add an original slim edge for the thin slithers you scrape, the idea being you use the more robust edge initially, then the slimmer one, or simply use the one most suited to the role, i can reduce the war between the two.

Then I thought if I made it fit the Bambu scraper blade too….if needed!

And then finally…after printing, I thought this looks a bit like a Southpark-esq Batman…purely by accident.

So I leant into that.

So features

• 2 scraping blades.
• Alternate inclines for longer edge life (estimated 3* longer than the standard scraper), less printing, more using!
• Attaches to Bambu scraper as an option.
• No bridges or rafts…simple print.
• Thumb in mouth ergonomics.
• It looks like Batman
• It looks a bit like Southpark.
• No extra parts *required
   

*while you don't need extra parts, if you want to add the Bambu metal edged blade, you can…so you will need that and 2x4mm self tapping screws. Also, I find better results with this attached, upside down as in the photo.

I don't recommend you print in colour, that was just for show and is a complete waste of time and filament! It would create more poop than scraper…but I did it anyway :D