Bambulab swatches storage box /拓竹色卡收纳盒

I iterated on the concept of the hinge box model and came up with this box, which is compatible with the BambuLab swatches.

Thanks to the hinge structure on the side and the Z-direction clearance provided by this hinge, there will be no structural interference even if the lid and the swatches are very close in size.

First, the drawbacks:

This box does not have a handle for "easy“ opening.

I didn’t want any protrusions on the outside of the box. The wall thickness of the box is also very thin, so recesses couldn’t be made either.

My hands are relatively large, so I can pinch the sides of the box to open the lid.

If your hands are smaller, you might need a more interesting posture, using both thumbs to push the lid upwards.

Due to the short hinge, a fulcrum is formed at the pivot point, and if the lid is opened at a larger angle, the hinge may come off.

However, since the installation process is not complicated, it is easy to reposition even if it comes off.

When closing the box, it is easier to press down on both sides of the lid with your thumbs to close it properly and avoid the hinge coming off.

The swatches are arranged quite tightly, making them not particularly easy to take out.

There is no partitioning by swatch type:

considering replaceability, I chose to solve this problem with a single sheet of paper.

like this:

Model Description:

I provided multiple lids: a lid without holes, a lid with a hole in the center, and a lid with a slightly offset hole.

I chose the last one.

The reason is as mentioned before: it is convenient to read when a label indicating the type of color card is attached.

Assembly:

For assembly instructions, please check here.

Suggestions:

Since the pivot part is slightly thin, it is recommended to print several hinges at once as spares to prevent damage during assembly.

--------------------------------------------------------------------------------

我把铰链盒的模型概念进行了迭代。

得到了这个色卡盒。适配拓竹官方的色卡样本。

得益于铰链结构在侧面，并且这种铰链提供的Z向间隙，即使盒盖与色卡的大小极度接近也不会出现结构的干涉。

先说缺点：

这个盒子没有设计方便打开的抓手部件。

因为我不想让盒子的外部有凸起。盒子的壁厚也很薄，所以也无法做凹陷。

我的手较大，所以可以同时捏住盒子侧面翻开盒盖。

如果您的手较小，可能需要一个比较有趣的姿势，以使用双手的拇指向上推开盒盖

由于铰链较短，在转轴部分会形成支点，如果将盒盖的打开角度打开得更大，会导致铰链脱开。

不过由于安装过程不复杂，所以即使脱开也很容复位。

关闭盒子的时候，使用双手的拇指向下按压盒盖的两侧会更容易闭合到位，避免铰链脱开。

色卡排列较紧密，不是特别容易拿取。

未按色卡类型进行分区：考虑到可替换性，我选择像这样，用直接一张纸解决这个问题。

模型说明：

我提供了多个盒盖：未开孔的盒盖，开孔在中央的盒盖，开孔有一定偏移的盒盖。

我选择的是最后一种。

原因如前：贴上标识色卡类型的纸条时，方便阅读。

装配：

铰链的安装方式请在这里查看

建议：

因为转轴部分略细，一次多打印几个铰链备用，以防在装配时损坏。

我发现全球站同步到中国站的说明，有时会让图片或超链接消失，如果您对它感兴趣并遇到了图片消失的情况，请到全球站查看。