September 4, 2024
Description
Project: Metal Gear Solid Snake.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Elegoo Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White
At layer #12 (1.04mm) swap to Yellow
At layer #15 (1.28mm) swap to Red
At layer #17 (1.44mm) swap to Jade White for the rest.
License:
BY-NC
Dakiren
