Rei Ayanami (Evangelion) - Hueforge

Rei Ayanami (Evangelion) - Hueforge

Please use the provided print profile or ensure to use the settings in red as described below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x84.37mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Matte Ivory White
PLA Kingroon Blue
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal
At layer #9 (0.64mm) swap to Ivory White
At layer #16 (1.36mm) swap to Charcoal
At layer #17 (1.44mm) swap to Blue for the rest