Skeleton key wall mounted key holder

I designed this key holder for this contest. I was inspired by old skeleton keys.

I used stock 0.2mm stock settings, but with 3 walls instead of 2.

To assemble the key holder press the hook into the slot that is in the keys body. It was a tight fit for me, but you may need glue. The hook must be facing up. Screw the wall mount to the wall and slide the key holder onto the mount.

Dimensions of the Key holder are: 200mm x 130mm

Layer Height: 0.2mm Stock settings with 3 walls

Infill: 15% infill

Material: I Used Overture PLA

Supports: On build plate only