Passthrough Carrot Fidget

Hello!

Continuing my series of impossible objects with a carrot!

The design is very satisfying to hold in hand and fidget with. I added a profile for a mini version aswell as a larger version so pick the size you like most :)

This model requires a bit of post processing as you need to remove the brims around the bottom of the carrot. I would reccomend using a pair of thin pliers,knife or box cutter to cut into the brim and remove it.

The green stem part needs to be inserted into the hole in the carrot. If the stem doesnt passthrough nicely just move it around a bit till it gets into the right place.

Print settings for LARGE size:

• 0.4mm nozzle
• 0.2mm layer height on main carrot body and 0.16mm layer height on green stem part
• brim on
• no support for carrot part, support for green stem part
• for green stem part add 1 layer of raft of 0.1mm
• print a bit slower if not using the provided print profile

Print settings for MINI size:

• 0.4mm nozzle
• 0.16m layer height
• brim on
• no support for carrot part, support for green stem part
• for green stem part add 1 layer of raft of 0.1mm
• print a bit slower if not using the provided print profile