Helmet Hanger Wall Mount (under 2 hour print)

The Helmet Hanger Wall Mount *** UNDER 2 HOUR PRINT & STRONG ***

I have been looking for a decent fairly quick print wall hanger. I have not been able to find one. Everyone I found was over 4 hours and used well over 100g of filament. So I designed this one using Tinker Cad then exported to Fusion 360 to refine.

Print this using my print profile and it prints in under 2 hours. It is a .28 layer height with 2 walls and 5% infill. May not seem like a lot but it holds up great. 

If you print and sell helmets and want to sell this mount with, all you have to do is join my membership to do so. Thanks.

This helmet hanger has 2 screw holes where it meets the wall. I recommend adding double back mounting tape to the side that meets the wall first to get the placement then adding 2 drywall screws. You are able to fit a screw driver in just fine to add screws. No need to worry about killing your knuckles. Not during mounting this hanger anyway.

** If you have any helmet slipping, try adding some black tape (electrical tape) or some silver tape (duct tape) to the top part that meets the helmet. This will help create a non slip connection. Works really well. **

I also have a Desktop/Shelf version if you would like to print that one. 

Works nicely with the Deadpool mask/helmet and I even tested it out with a full size Mando helmet and worked great. Please like and post pictures of your helmets being displayed with it. Make sure to boost as well please. Enjoy!