magnetic dust collection adapters with gaskets

magnetic dust collection adapters with TPU Gaskets

- featuring a TPU Gasket for superior seal

- adapter for 4 inch DWV fittings, features a slight angle allowing it to be attached to a pipe that's mounted flush along a wall while maintaining clearance.

- hose fittings feature spiral threads to help hold hose in place.

- makes use of 2 10x3mm magnets per tab, for 16 in total per fitting

additional tool adapters added, the standard one fits most of my tools but sometimes you need something a little smaller or larger, measure your tools dust port before printing to see which version you need, a few wraps of electrical tap around the tools dust port can help to snug up the fit of an adapter that's just slightly too large, feel free to comment which tools you printed which adapters for to help the community know what to print for their shop.

please consider one of the included sizes first however if none of them work for you i have included my CAD Files from Fusion 360.

i suggest printing extra thick walls on the hose fittings to survive potential drops.

print face down, supports recommended but optional, supports should only be used in the magnet holes and gasket groove

i recommend alternating the polarity of the magnets as you go around the circumference of the fitting this will let you use any fitting in combination with any other and you wont have to worry about what fittings match which.