November 12, 2023
Description
A fidget toy keyring designed to resemble the Bambu Lab AMS.
This version is smaller than my fullsize version, and features a loop for adding it to your keys/lanyard/whatever!
Each filament spool ratchets and makes a satisfying sound when spun!
Step 1: Cut a 45mm length of 1.75mm filament.
Step 2: Attach the lid and base of the AMS together using the 45mm filament as a hinge.
If the filament doesn't fit, ensure there is no support material in the hinge. If it still doesn't fit, adjust your print settings and try again (or use a drill/lighter).
Step 3: Assemble the 4 filament spools.
The 2 halves should snap together firmly without glue.
Step 4: Put the spools into the AMS and use the square bar to lock them into place.
You might also want to glue the bar into place by adding a tiny amount of glue on the sides.
Step 5: You're done!
If the filament spools don't rotate properly. Ensure that the ratchet piece is facing the correct direction, or flip the spools around.
License:
Standard Digital File License
BuildyBryce
