Cubicle Coat Catch - Hanger Extraordinaire

This is a complicated approach to a simple problem; meaning that I WAY overengineered this coat hanger.

 

I designed this and printed many of them for most of the department at my previous job. It's incredibly strong; I could literally hang on it! The way it snaps into place is super satisfying too.

 

Key Features:

• Hooks have claws to grip jackets that are missing the hanger loop:

   

• Triple spine minimizes material while making it stiff and springy:

   

• Designed with sweeping gussets to eliminate the need for support material:

   

• Cap lip fingers on each side to grip under cubicle cap:

• Coped to contour: (GIF also shows cap lip fingers)

   

• Groove lock - Locks into groove at cubicle wall end: (versions with and without groove lock are available)

 

No supports needed.

 

Model Dimensions:

 

Plate 1: “Laterally Repositionable” __ Hangers on BOTH sides of cubicle wall - It clips on and can be repositioned side to side.

Plate 2: “Laterally Repositionable - HALF” __ Hangers on ONE side of cubicle wall - It clips on and can be repositioned side to side.

Plate 3: “Locked in Groove” __ Hangers on BOTH sides of cubicle wall - Locks into groove at the end of the cubicle wall.

Plate 4: “Locked in Groove - HALF” __ Hangers on ONE side of cubicle wall - Locks into groove at the end of the cubicle wall.

 

ENJOY!

 

Boost MeBoosts are greatly appreciated!